The main things you should know about HHO fuel supplement systems. HHO Gas is promising but here are some tips to know before you get started.
1. You need a good HHO Gas generator, the
IHHOI.ORG
International HHO Institute can help you understand if you have a good HHO generator or a bad one.
2. You need a good Pulse Width Modulator to help with gas production. What the pulse width modulator does is allow you to control the power provided to your gas generation process to help you get the greatest gas production using the least amount of electricity. If you don't use a pulse width modulator you will use more electricity which will be harder on your alternator bridge rectifier and it will be more likely to fail. Also because of the higher alternator current production your vehicle will use more gas to turn the alternator which may completely offset your fuel savings. You will also create excessive heat which will break down your electrolyte and your HHO cell quicker.
3. You must overcome the vehicle computer which monitors the exhaust gases to adjust fuel mixture. The most common is the Oxygen sensor which will be thrown way off from the oxygen rich environment created by supplementing your fuel with HHO. When you vehicles computer sees an oxygen rich exhaust it will dump more fuel into the engine to get the exhaust gases back within specs. If your running an
older motor you will need to re-jet it.
These are just the basics of HHO Gas production, there is much more to consider.
Good Luck
When you add extra power demand on you vehicle's charging system you need a good Quick Start High Output Alternator