Alternator Brackets and Generator Conversion Mounting Accessories

Alternator and Generator Conversion Brackets

Part # A200 Universal Alternator Mounting Bracket

a200 mounting bracket

Universal Alternator Bracket to install Delco, Ford and Chrysler alternators in place of generators that have 2 mounting ears. Ideal for agricultural, industrial, and older vehicles. Bolts to existing 2 ear generator mounting bracket. Complete with hardware.

 

Part # A255 Ford Generator to Alternator Conversion Bracket

a255 ford generator to alternator conversion bracket

9N Conversion Bracket to install Delco (2" mount) alternator on tractors that have the generator on the RIGHT side. Complete with hardware.

 

Part # A265 Ford Left Side Generator to Alternator Conversion Bracket

a265 ford generator alternator conversion bracket

Ford 8N Conversion Bracket to install Delco or Ford alternator on tractors that have the generator on the LEFT side, 1952 and later. Complete with hardware.

 

Part # A270 Delco-Remy to Chrysler Conversion Bracket

a270 delco to chrysler conversion bracket

DELCO TO CHRYSLER ALTERNATOR CONVERSION BRACKET. Install DELCO alternator (2" mounting) on vehicles with CHRYSLER alternators. Complete with hardware .

 

Part # A275 Delco-Remy to Motorola Conversion Bracket

a275 delco to motorola conversion bracket

DELCO TO MOTOROLA ALTERNATOR CONVERSION BRACKET. Install DELCO alternator (2" mount) on vehicles with MOTOROLA (1" mount) alternators. Complete with hardware.

 

Part # A285 Delco or Ford Dual Foot Alternator Conversion Bracket

a285 delco to ford dual foot conversion bracket

BRACKET to install DELCO or FORD alternators on vehicles with "DUAL FOOT" alternators. Can be used on ARROW, COLT, COURIER, NISSAN (DATSUN), LUV, MAZDA, SUBARU, TOYOTA and industrial applications. Complete with hardware.

 

Part # A290 Delco 2" to Dual Ear Conversion Bracket

a290 2 inch to 2 foot mounting bracket

DELCO TO DELCO ALTERNATOR CONVERSION BRACKET. Install DELCO (2" mount) on vehicles with DELCO 27SI, TYPE 100 alternators (dual ear mounting). Complete with hardware.

 

Part # A300 Universal Welding Bracket

a300 welding bracket

UNIVERSAL WELDING BRACKET FOR DELCO ALTERNATORS. Install DELCO alternators (2" mount) with bracket that can be WELDED to customer supplied engine bracket. Un-plated for easy welding. Complete with hardware.

 

Part # AJ180 Universal Welding Bracket

aj180 sae 4 inch bracket

BRACKET for mounting "truck" type alternators with SAE 4" mounting ear spacing. Machined from mild steel to be customer WELDED to existing or custom made mounting plate. Includes grade 8 bolts.

 

Part # A2009 Delco to Ford Mounting Spacer

a2009 mounting spacer

DELCO TO FORD SPACER. Install DELCO (2" mount) alternator on FORD vehicles (3" mount). Note: mounting hole on Delco alternator must be enlarged to accept FORD 7/16" bolt.

 

Click here for 6 volt negative or positive ground Delco Remy Based Alternators

Click here for 8 volt and 12 volt negative or positive ground 10SI alternators


Conversion Pulleys

Part # A202 1-Groove V-Belt Pulley For Delco 10SI Series Alternators

a202 v belt pulley

WIDE BELT PULLEY (15/32" and 1/2") for industrial and agricultural applications. 2-1/2" diameter, small enough for adequate RPM on slower speed motors, large enough for long belt life. Cold rolled steel, .670" bore for DELCO and FORD alternators.

 

Part # A203 EXTRA WIDE BELT PULLEY (5/8", 21/32", 11/16" and 3/4") for industrial, farm and antique vehicle applications. 2-1/2" diameter.

a203 extra wide belt pulley

EXTRA WIDE BELT PULLEY (5/8", 21/32", 11/16" and 3/4") for industrial and agricultural applications. 2-1/2" diameter. Cold rolled steel, .670" bore with special long neck nut.

 

Belt Tension Extension Brackets

Part # A215 Curved Belt Tension Extension Bracket, may be cut off to desired length

a215 curved belt tension extension bracket

CURVED BELT TENSION EXTENSION BRACKET. Use with alternator conversions. 1/4" thick x 1-1/4" wide curved end bar. Can be bolted or welded to existing bracket. Unplated for welding.

 

Part # A220 Heavy Duty Curved Belt Tensioner Extension Bracket

a220 heavy duty curved belt tension extension bracket

HEAVY DUTY CURVED BELT TENSION EXTENSION BRACKET. For "truck type" J-180 alternator installations. Heavier 3/8" thick x 1-1/4" wide curved end bar. Can be bolted or welded to existing bracket. Unplated for welding.

 

Discontinued Part # A212

a212 short curved belt tension extension bracket

CURVED BELT TENSION EXTENSION BRACKET. Use with alternator conversions. 3/16" thick x 1" wide curved end bar. Can be bolted or welded to existing bracket. Unplated for welding.

Part # A210 Universal Belt Tension Extension Bracket

a210 belt tension extension bracket

UNIVERSAL BELT TENSION EXTENSION BRACKET. Use with alternator conversions. Design allows angles up to 45 degrees.

 

Conversion Accessories

Part # A100 UNIVERSAL RELAY for a multitude of 12 volt applications

a100 universal relay

UNIVERSAL RELAY for a multitude of 12 volt applications. One normally closed contact and one normally open. POS. or NEG. ground. With connector and terminals. Similar to DELCO field relay.

 

Part # A250 Ignition Resistor

a250 ignition resistor

UNIVERSAL IGNITION RESISTOR. Ideal for converting 6 volt vehicles to 12 volt systems. Agricultural, industrial and commercial applications. Use with universal alternator brackets.

 

Part #s P8, P20, and P30 - Diodes

p820 axial lead diodes

AXIAL LEAD DIODES. Perfect for diode trio replacement.

Part # P8 - 1 Amp

 

Part # P20 - 3 Amp

 

Part # P30 - 6 Amp

 

Part # 1100 Flexible Alternator Wires

flexible alternator wires

LEECE NEVILLE "JB" ALTERNATOR WIRES. Rectifier to regulator POSITIVE and NEGATIVE connection. Like L-N 79028 and 79029. Flexible wires with TEFLON insulation, a significant improvement over OEM.